A part of the diaphragm is coated with a transparent reflective film, and the image and data on the dashboard transmitted from the projector can be displayed on the diaphragm as needed, which is convenient for the driver to observe, and the driver does not need to look down at the instrument when driving. The image shows that if the intelligent glass cooperates with the infrared image display system, the driver can see clearly the objects around the 2km in front of him on a foggy day. The photoelectric sunshade roof glass can automatically absorb, accumulate and use solar energy to drive the car fan when the car is driving or parking, and it can also continuously recharge the car battery.
According to the management of medium-and long-term weather forecast, in case of continuous low temperature, the temperature of the mushroom house / shed should be kept above 8 ℃ ~ 10 ℃. The main measures for heat preservation and warming include: thickening the roof cover at night; hanging blankets on doors; closing doors and windows for heat preservation in the morning and evening; opening doors and windows around noon in sunny days; opening only leeward vents for short-term ventilation in rainy and snowy weather; in cold or windy weather, close doors, windows and vents to prevent cold air from attacking. When the weather is fine, open the cover to increase the temperature of the light, when the light is strong, it is best to set up a sunshade net under the greenhouse film and above the bacterial stick to protect the light and heat. If there are heating facilities such as hot air stove, the temperature of the mushroom room / shed can be increased by heating, but attention should be paid to prevent the smoke from being discharged into the shed and cause poisoning. In addition, the ditch cleaning and drainage of the mushroom shed should also be done to reduce the humidity in the greenhouse in the rainy season and improve the mushroom quality.
The importance of glass greenhouse. Temperature is the basic condition to ensure the normal growth of crops. Greenhouse is a thermal insulation agricultural facility for the normal and rapid growth of crops. Heat preservation is an important work in greenhouse agricultural production, so suitable covering materials must be selected. Generally speaking, glass greenhouse is better than glass greenhouse, glass greenhouse can play a decorative role in appearance, and the aging and damage problems of glass greenhouse can be relatively small compared with plastic greenhouse; in terms of performance, due to the complexity of the environment, glass greenhouse can resist various loads (wind load, snow load, etc.). Aluminum alloy (or stainless steel) + plexiglass, ordinary glass, low-cost bamboo ponds and plastic films with beautiful and durable, windproof, rainproof, sunscreen, heat preservation effect and cost, can also be equipped with sunshade and sprinkler system. Plants usually need plenty of light and better glass. Of course, the one-time investment cost of plastics is lower, but the later maintenance cost is also higher, and plastics are easy to age.
Polyurethane foam is widely used in automotive interior decoration and vibration-absorbing parts, such as coating materials, polyurethane rigid plastic plates, polyurethane elastomers, seat soft foam materials, decoration parts, sofa leather, roof accessories; the most widely used is a variety of soft and hard polyurethane foam materials, which have vibration insulation, sound insulation, noise reduction, thermal insulation; PU can also be made into automotive polyurethane coatings, binders, sealants and so on. The PU representative parts on the car are dashboard, rearview mirror, bumper, seat cushion, headrest, steering wheel, instrument panel anti-vibration pad, pillar decoration, front roof lining, window frame, ceiling and side roof frame decoration, door liner, sunshade panel, rear roof frame decoration and so on.
Jinan District Holiday House Electric curtains how much to inquire, 6. Energy saving and environmental protection: electric shutter windows can achieve the appropriate indoor temperature by adjusting sunshade, which can effectively reduce the heat load of air conditioning, absorb solar radiation energy and reduce heating load in winter, thus playing the role of energy saving and consumption reduction. 5. Heat preservation and heat relief: electric curtains can effectively prevent strong outdoor light, maintain a steady state for indoor temperature, and are more suitable for work.
Dashboard, auxiliary dashboard, seat, ceiling, door guard, interior cover, steering wheel, floor mat, glue, suitcase, coat rack, sunshade, storage box, ashtray, gear, central control, automotive electronic system, safety information display system, interior lighting system, interior acoustic system, interior modification, interior renovation, vehicle sealing technology products, interior accessories Car carpets, car cushions, safety seats, seat covers, headrests, handle covers, armcases, anti-theft locks, seat belts, sun shields and decorative products, surface coverings, curtains, sunshade products and other
Shaoguan pp tank processing drawings at present, spray-free plastic has been successfully used in the automotive field of side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics are generally synthesized from petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of renewable raw materials with low toxicity and low harm, greatly reduce the amount of VOCs volatilization in the car after being prepared into automobile interior parts. In addition, this bioplastic can be decomposed to facilitate subsequent recycling, so it is a more environmentally friendly type of plastic.
The main products of Changshu auto decoration include door guard assembly, dashboard assembly, auxiliary dashboard assembly, suitcase interior assembly, coat rack assembly, sunshade assembly, column assembly, door and window trim, carpet, plastic tail door and mold inspection tools, equipment automatic design and manufacture, etc.
